Milling Plant Converts Unsupported SCADA to WinCC for Plant-Wide Visibility

The Situation

The SCADA (Supervisory Control and Data Acquisition) system at a milling plant in Portage la Prairie, Manitoba was no longer supported by the software maker. The existing PLC network was working well, but the operator interfaces needed improvement.

Celco, a Tavoron company, converted the plant’s outdated FactoryLink system to a new WinCC SCADA platform. Operators now work with familiar screens and, for the first time, can see operations in every area of the plant from their own station.

The Challenge

The plant needed to replace its outdated, unsupported FactoryLink graphical interfaces with a new WinCC SCADA system on a new hardware platform. To ensure the new system was fully functional, both SCADA systems had to run in parallel.

There was one major hurdle: no migration path existed between FactoryLink and WinCC.

The Solution

Without a direct conversion option, the Celco team recreated each screen graphic by hand, keeping a similar “look and feel” to the previous screens. Each PLC tag was manually entered and animated in the new graphics.

The team also gave operators something that wasn’t possible before: a view of all operations in all areas of the plant from their own station.

The Results

Celco migrated the plant from an unsupported SCADA system to a well-known, supported platform, even though no straight conversion or migration path existed.

Looking Ahead

The mill now has a fully functional SCADA platform it can leverage as the plant grows and new equipment comes online. With supported software in place, the plant no longer has to rely on outdated interfaces to run its operations.

Explore SCADA Solutions

Contact our team to discuss your project and find out how Tavoron can help.